Translate It!

    Translate to:

Print This Post Print This Post

Cremelo Main Chassis Construction

This page covers the fabrication and construction of the main chassis top, sides and base, together with short instructions on hand-made tagboards.

Main Panel showing initial holes cut before bending

Referring to the cutting plan, the main chassis is made from sheet aluminium (~20swg) 315mm X 110mm. As well as the component mounting holes, fixing holes [...]

Print This Post Print This Post

Cremelo Cutting Plan

Cremelo Plan & Elevations

All dimensions in the above are in millimeters. Material I used was 20 swg aluminium. Fixing holes for the two valve bases are not shown, as the bases you use may not be the same as mine. Similarly, you should check the dimensions of the two foot-switch bushes and change size [...]